Safety footwear is crucial for keeping employees’ feet safe when working in a hazardous area. It’s simple to own a pair of protective shoes, but do you know how to wear and maintain sturdy footwear? In this article, guardboots will share with you how to store safety shoes.
Cleaning the safety shoes should be done at the end of each workday. Place in a dry, cold environment. If the safety shoes become wet, pack the interior with paper towels or newspaper and allow them to air dry. Only a soft brush or cloth should be used to gently rub when washing is necessary. We encourage you to read below to find out more!
How to clean safety shoes
1. Clean shoes after use
After finishing the job, you should clean up the majority of the dirt. This cleans any muck from your boots and lets the skin breathe properly. To prevent the stains from spreading to other areas of the canvas shoes, you should let the stains dry, use a brush to brush them away, and then submerge the shoes in water for cleaning. If the leather is water-resistant, you can first spray water directly on the stain and then pat it dry with a towel.
If necessary, wash the safety shoes using a brush or cloth that has been dampened with soap or detergent. Please refrain from using a harsh brush or washing it with water or soap when cleaning or maintaining it. Safety shoes should be immediately dried after cleaning by being placed in a well-ventilated area. Avoid using tumble dryers or hot air blowers to dry garments.
2. Clean shoes when wet
Safety shoe uppers are typically produced online or bonded. So, it is impossible to wear safety shoes as rain boots. Long-term soaking in water is not possible for them. When it rains, you should thoroughly dry your shoes afterward. The stains on the shoes should first be removed with a damp cloth, and then with a dry cloth. Absolutely do not scrub vigorously with a brush on suede footwear. After cleaning, let the shoes dry in the sun; if not, hang them up and stuff them with newspaper. Avoid using a dryer to dry them since it will make the fabric wrinkled and discolored.
3. Use polish on your boots
To extend the life of the shoe and stop the leather from cracking, you can clean the safety shoe’s surface once it has dried using a special shoe polish. You can maintain the flexibility and waterproofness of your work boots by giving them a periodic polish or spray-on impregnation treatment. Additionally, polished shoes are significantly dirt-resistant. Use non-greasy lotion. In addition to making the leather work boots less breathable and causing the shoes to lose their natural stiffness, doing this will clog the
How to store safety shoes
1. Regularly check the condition of shoes
The risk of harm from factors you cannot control, such as dust, sun, wind, temperature, humidity, acid, hazardous materials, nails, etc., is always present in the workplace. Therefore, you should carefully inspect your shoes before each usage to guarantee that they are always in good shape and that you have the ability to defend yourself against toxic substances.
Particularly, you must constantly examine every component, every aspect of the product, including the toe, heel, leather, sole, and more. This is done to make sure your shoes can guarantee a high level of safety for you while working. If you check your shoes and discover that they are broken, you should go to a reputable store right away to have the broken parts replaced or buy a new pair to ensure maximum safety.
2. Store shoes in a box
How to store safety shoes? After each use, please put the safety shoes back inside the case. Any authentic safety shoes that you purchase come packaged in a paper box. All you have to do is put the shoes back in this box after each wear. The shoes won’t mold if you place it in a desiccant box or with some newspaper. To avoid moisture, store items in a designated area that is at least 20 cm from the ground and the walls. Work safety shoes must also avoid areas with high temperatures and direct contact with acids, alkalis, oils, and caustic substances.
3. Ventilate the soles of your shoes
The best option is always to let your work boots air dry. Let them air-dry for as long as possible after they have dried (at least 12 hours). Maintaining a dry, airy environment is equally vital for the soles of your shoes. Avoid putting them next to a heat source because doing so will make them lose their form and functionality. Here is how to store safety shoes that you should consider after cleaning.
4. Avoid soaking shoes in liquid for too long
You don’t have to stress too much about this if your shoes are waterproof. It’s not a good idea to wear protective footwear in a humid atmosphere or to soak shoes for an extended period of time in fluids. To keep your shoes in good condition, try to avoid putting them in liquids too frequently.
Wanting to keep a pair of shoes used for a long time, everything has limitations, and you need to know the characteristics of each of your shoes to have appropriate cleaning and maintenance methods. Most of today’s cleaning liquids have strong detergents, so you should avoid soaking your beloved shoes for too long.
5. There is always something in the bag to clean and bleach shoes
Once you utilize specialist cleaning products, stubborn stains will go instantly. But when left on the shoes for too long, they adhere and become challenging to remove. So, have these items in your purse so you can handle them right away. Your safety shoes will always be pristine and clean.
What’s more, this quick remover helps keep stains from staying on your shoes for long. Especially the sole, it will be difficult for you to move when the stain clots under the sole of the shoe, even if it is dangerous for you. How to store safety shoes? This is also effective.
NOTES:
Safety shoes are an essential piece of workwear protection. A pair of protective shoes with improper care, cleaning, or use will also have a shorter lifespan and won’t be able to be worn for an extended period of time. To keep your protective shoes looking beautiful, you should typically wash them once a month. When your shoes get dirty, you should always clean them.
Replace old protective shoes with new ones so that your feet are constantly safe and protected from hazards like iron nails poking through the soles, abrasive surfaces, and skin that is peeling.
So that they can switch out their work shoes frequently, employees should have two or three decent pairs of shoes for the office. The life of safety shoes can be significantly extended by switching out a pair each day.
Cleanings of the safety shoe are not just restricted to the surface and surrounding areas; in order to avoid dust buildup, you also need to frequently clean the bottom of the safety shoe. Due to the fact that excessive dust would not only harm the safety shoe’s anti-static performance but also decrease its anti-slip capabilities.
Conclusion
The longevity of safety shoes and safety shoes is sometimes underestimated. Even if you believe that safety shoes are still in great shape and may be worn for a few more months or years. Work safety shoes are used in areas with dust, gravel, stone, sand, and cement, in contrast to other shoe styles. The more often a person works in factories, warehouses, and construction sites, the dirtier their shoes are.
So you need to know how to store safety shoes to prolong the life of your favorite shoes. This is also a cost-effective way to pay attention.
You maybe also like: 5 Best Work Boots for Men